Intelligent operation of tempered glass with a yield of up to 99%
Main products: Tempering furnace, glass tempering furnace, with years of research and development and production experience
The selection of glass tempering furnace must first start from the market requirements, and select the market direction that you want to enter. The following are commonly used selection reference standards: (1) Building engineering glass, generally requires a thickness of 5MM to start, if there is Low-e glass, should choose a larger width, higher loading rate of convective glass tempering furnace;
After years of dedicated research and repeated experiments, Yuantu technical team launched a new generation of energy-saving high-stress fireproof glass tempering furnace in 2021. This tempering furnace integrates the core technology of energy saving of Yuantu tempering furnace, solves the world problem of high stress fireproof glass and high energy consumption, and lays a solid foundation for energy saving and emission reduction and the popularity of building fireproof glass; This tempering furnace can not only toughen traditional architectural glass, single silver, double silver lowE glass, but also toughen ultra-thin tempered glass and ordinary fireproof glass, high boron fireproof glass, lowe fireproof glass, fire time up to more than 3 hours, fire detection pass rate can reach 100%. All staff of Yuantu Technology Development Co., Ltd. are steadily moving forward along the road of energy saving, science and technology and innovation.
Yuantu Technology invites you to attend the 31st China Glass Exhibition After delays and cancellations in 2020, the long-overdue 31st China Glass Exhibition will finally be launched. Yuantu Technology invites you to participate in this glass industry event after a year.
Recently, Yuantu has intensively installed several fireproof glass tempering furnaces, and two fireproof glass tempering furnaces have been shipped by the end of this month. The key word for glass deep processing in 2019 to 2020 is fireproof glass, which stems from the awareness of users, industry and the country about the potential danger of building fire. Laminated fireproof glass and cesium potassium liquid fireproof glass have been done in the market, but the cost of laminated fireproof glass is high, and the fire performance of cesium potassium liquid fireproof glass is often difficult to meet the standard.
China's national mandatory standard GB21340-2019 was released on October 14, 2019, and will be officially implemented on May 1, 2020. The mandatory standard stipulates the unit energy consumption limit of tempered glass. Let's take a look at what regulations are in place and how they affect producers and users.
On August 21, the "First China (Guangdong, Hong Kong and Macao) Fireproof Glass and fire-resistant doors and Windows Curtain Wall Summit Forum" was held in Guangzhou, from the housing, fire protection, market supervision and other government departments across the country, the state and Guangdong, Hong Kong and Macao industry authorities, fireproof glass and fire-resistant doors and Windows curtain wall production and application of upstream and downstream enterprises, media representatives and other more than 600 people attended the event.
Yuantu Technology new generation of energy-saving glass tempering furnace, energy saving effect is remarkable; After the use of many customers and the national glass quality testing center test: 5mm glass tempered only 2.5 degrees of electricity per square meter. If you are a glass factory and have a tempering furnace, you must be very concerned about the power consumption of the tempering furnace; When you calculate the quotation, accounting for expenses, power consumption is really a big head ah; How many kilowatt-hours per square meter do you think you are calculating now? Our tempering furnace 5mm only needs 2.5 degrees of electricity!!! This is also the bearer of our tailor-made, special aircraft concept. If you
Compared with ordinary radiation-heated glass tempering furnaces, the glass tempering furnaces with radiation-heated forced convection technology have obvious advantages, especially when dealing with Low-e glass and glass with special specifications such as grooves and holes, the radiation-heated forced convection tempering furnaces not only heat evenly but also take a short time. At present, glass technology companies have applied nano-coating technology and thermal circulation compressed air convection technology to glass tempering furnaces. Nano-coating technology is to spray the heating wire in the glass tempering furnace with high emissivity and anti-oxidation RSI rare earth nano-coating, so that the energy generated by the heating wire can be more converted into infrared radiation heat transfer to the glass. The heat circulation compressed air convection technology can make the air in the glass tempering furnace have a certain pressure, and it is easier to form the upper and lower gas convection in the furnace, which greatly improves the convection heat transfer ratio in the furnace, and at the same time, the compressed air is preheated by the hot gas discharged from the tempering furnace before entering the furnace, so that the energy is recycled. Compared with the ordinary radiation tempering furnace, the tempering furnace using the above two technologies can save 34% of energy, and the temperature in the furnace is 30 ℃ lower than that of the ordinary tempering furnace. http://www.lnszytkj.com/
At present, in addition to the main tempering furnace, glass tempering furnace, Yuantu technology also has a number of series of products such as glass cleaning and drying machines, laminated glass production lines, covering the major processing equipment required by glass deep processing enterprises, in the industry with mature technology, high-quality products and high-quality service, has achieved a good reputation, is expected to become the strength of the "Golden glass Award" dark horse.