Intelligent operation of tempered glass with a yield of up to 99%

Main products: Tempering furnace, glass tempering furnace, with years of research and development and production experience

NEWS
Energy saving, low consumption and excellent quality far-image technology is expected to become a

2019-05-21

Energy saving, low consumption and excellent quality far-image technology is expected to become a "golden glass Award" dark horse

【 Abstract 】 A few days ago, the "Golden Glass Award" the fourth China glass industry top ten brand selection is in full swing, the industry's well-known brand Far image technology, with its low energy consumption, excellent quality and other advantages, is expected to become the "Golden glass Award" activity strength of the dark horse. Since the launch of the "Golden Wave Award" selection activity on November 18, 2016, the well-known brand Yuantu Technology has achieved the second voting ranking in the industry. A few days ago, the "Golden Glass Award" the fourth China glass industry top ten brand selection is in full swing, the industry's well-known brand Far image technology, with its low energy consumption, excellent quality and other advantages, is expected to become the "Golden glass Award" activity strength of the dark horse.

东方网

Learn More
Industry to capacity supervision to start far-map technology to win the market with energy-saving advantages

2019-05-21

Industry to capacity supervision to start far-map technology to win the market with energy-saving advantages

Recently, The State Council glass industry to capacity supervision plan has been launched. From February 12 to February 22, the cement and glass industry special action inspection team to eliminate backward production capacity was jointly formed by the Ministry of Environmental Protection, the General Administration of Quality Supervision and Reform Commission, the Ministry of Industry and Information Technology, and the Safety Supervision Bureau, and went to 31 provinces and cities across the country. Focus on supervising the implementation of documents such as the Guiding Opinions of The State Council on Resolving the Contradiction of Serious excess Capacity, the Guiding Opinions of The General Office of the State Council on Promoting the Stable Growth of the Building Materials Industry, Adjusting the structure and giving benefits, and the Guiding Catalogue for Industrial Structure Adjustment. In this production capacity supervision plan, in addition to product quality compliance rate, enterprises

Learn More
Analysis of the current situation of the door and window market

2019-05-21

Analysis of the current situation of the door and window market

We often mention that "there is no off-season market, only off-season ideas; There are no bad industries, only bad companies." The current domestic door and window market competition has become more and more mature, relying on a single point of advantage to win the era has passed, instead of relying on the brand as the core of the system winning period, into the brand winning stage, competitiveness factors focused on the brand, no brand there is no core competition, there is no foundation for sustainable development. It is difficult for ordinary consumers to rationally judge the quality of products, and they believe in the power of brands. 1. Wealth industry with a total market of 800 billion yuan; 2. China's existing construction area is 46 billion square meters; 3, China's existing doors and Windows area of 11 billion square meters; 4. The replacement of old doors and Windows will add 1 billion square meters every year; 5. Urbanization construction adds 2 billion square meters of doors and Windows every year; 6, the new rural construction of new doors and Windows every year 500 million square meters.

Learn More
To the friends of deep processing!

2019-05-21

To the friends of deep processing!

To the friends of deep processing! Respectfully! Still insist on doing glass deep processing industry friends! Salute to you all! China's high-speed economic bubble development no longer exists, and many industries may have low growth, no growth, and negative growth in the future. But for our glass deep processing industry is definitely negative growth! Because our construction industry is basically a one-time input non-circular economy. Friends and rivals who used to be together are likely to fall or disappear now or in the next few years! Will you be forced to fall? Or are you ready to quit! Or get ready to fight for your life! I believe that most of my friends have not carefully considered this issue, and most of them still hope that the market will be better after next year, and everyone will have more work to do. I hope everyone can live. The reality is that the market is not going to be better next year, it's definitely not going to be better the year after that, and it's not going to be better in 10 years. In the next few years all industries will enter the forced reshuffle stage, the result is the survival of the fittest! We should stop and quietly reflect on our hard work over the years and decades. It's a bunch of old equipment and receivables. Because the plant and the land were mortgaged to the bank. So what's our way out? Is it just waiting to die? The answers and results you want are actually in your own hands, and only you can save yourself. There are no failed industries, only failed companies! It's survival of the fittest. The reform of the country has entered the deep water zone, and our enterprises also have to face the reform. If you do not change, you will definitely die, and disorderly reform will change the death, then how to change? As long as the core is grasped, I think the reform is very simple. Therefore, I would like to make the following suggestions to our brothers who are still insisting on it: 1. Risk control: (1) Unsparing and comprehensive settlement of receivables, receivables are harmful and beneficial. The receivables will eat your interest, the customer will neglect you because of this, the customer's cash business will flow to the lower price of the peer, if the customer goes out of business directly to you can not recover the risk. We clean up the receivables, and there will be a temporary drop in business. Three months from now, your business will be much better than before. (2) Glass is a high risk industry, it is necessary to establish the personal safety of employees and the risk of employee labor contracts; (3) The risk of reasonable tax avoidance (audit); 2. Improve competitiveness. It is about energy conservation, automation, and layoffs: (1) What hot processing should do is: energy saving + layoffs. Reduce the use of transformers; Tempering furnace energy saving transformation, such as double chamber furnace upgrade, increase the use of low electricity at night to save electricity; It can also reduce staff. (2) Cold processing to do is: mechanical automation + layoffs: cutting and washing without falling line production, based on existing equipment for transformation; Cutting staff. Make mechanical automation changes, and do not believe in 4.0 intelligent automation. For example: based on the actual situation, according to their own existing equipment to transform. Cutting machine + bilateral grinding line + cleaning machine to deal with the whole batch of glass (5-6 people per class); Cutting machine + four single-side grinding and turning table connection + cleaning machine to deal with loose glass (5-6 people per class). 3. Strengthen marketing and management: (1) Strengthen normal sales, screen quality customers, and receive customers from shuttered manufacturers; (2) Especially to strengthen online marketing, guide customers to place orders online; (3) Where conditions permit, increase export sales. (4) Please be kind to your employees, must be downsized, and must be strong; (5) Introduce training institutions to conduct staff training. Employees without training are our biggest waste. Cultivate employees' sense of ownership.

Learn More
Tempering furnace about the reasonable choice of accessories

2019-05-21

Tempering furnace about the reasonable choice of accessories

It is one of the main production and processing links of glass production, and has been widely used in industrial development for many years. However, a whole tempering furnace is integrated by a large number of accessories, tempering furnace accessories and accessories selection and its role, the following do a detailed introduction. Tempering furnace accessories are mainly composed of four parts: discharge section, convection heating section, flat tempering section, and taking section, as well as high pressure centrifugal fan, air supply pipeline, bellows, gas path, electrical control cabinet, operating table, etc. The release section is mainly composed of four parts: steel rubber table, lifting table, side roll system and roller table diameter. The heating section is mainly composed of heating furnace body, transmission system and lifting system. The flat tempering section is mainly composed of a cooling grid, a conveying roller table and a bellows collector. The fragment is basically the same as the fragment, which is the basic composition of the accessories of a horizontal roller table segment, mainly these. However, when choosing, we must understand the types of glass products we mainly do, different kinds of glass need different construction methods, temperature, wind are different, which involves the choice of accessories is not the same.

Learn More
Application of high temperature rope in glass tempering furnace

2019-05-21

Application of high temperature rope in glass tempering furnace

The roller rope in the grate of the glass tempering furnace is high temperature and is a bad conductor of heat. Its surface is not hard. When the glass burns red and reaches the softening point, it will not hurt the surface of the glass and will not let the glass cool too quickly. If it is found that the roller rope is broken, it should be replaced in time to avoid unqualified products and cause losses to the company

Learn More
Multi-station heating technology of glass tempering furnace

2019-05-21

Multi-station heating technology of glass tempering furnace

The multi-station heating technology of glass tempering furnace not only has remarkable energy-saving effect, but also reduces the blasting phenomenon of glass tempering furnace to a great extent. The station of the glass tempering furnace refers to the reciprocating swing of the glass with the same specifications in the respective area along the length direction of the furnace body, the completion of the preset running time in the respective area, the glass is heated to the corresponding temperature requirements, and then moved to the next station. Finnish Lagestone company first put into use a double-chamber glass tempering furnace, that is, a 2-station heating furnace, the double-chamber glass tempering furnace produces significantly better glass quality, faster production rate, and significantly reduced energy consumption. The multi-station heating technology has been studied more deeply in our country. For example, the Fujian Provincial Institute of Mechanical Science has made great progress in the research on the time and energy consumption of glass heating in the glass tempering furnace, successfully completed the 8-station heating zone and the "single-bend" bending zone design, compared with the faster 4-station tempering furnace in China, the production speed is doubled, the energy consumption is reduced by more than 45%, and the product pass rate is increased to 98%. That's an increase of 3%. At present, the design level of tempering furnace is different, and the manufacturing process is also different, but the time of glass entering the oven is similar. In the heating process, the thicker the glass heating time is longer, heating due to the internal temperature of the glass is relatively slow, the surface of the glass and the internal temperature difference, when the surface of the glass and the internal temperature difference exceeds 80 ° C, it may explode the furnace. For multi-station glass tempering furnace, the more stations, the smaller the temperature difference. For the 8-station glass tempering furnace, it does not need to cool the tempering furnace first because the temperature difference between the furnace and the glass is too large, and then heat up, thereby saving electric energy. Therefore, the multi-station heating technology of glass tempering furnace plays an important role in the energy saving and emission reduction of glass processing enterprises. (Liaoning Suizhong Far Tu Science and Technology news, log on to the official website to see more tempering furnace information http://www.lnszytkj.com/)

Learn More
Analyze the role played in the process of glass tempering furnace

2019-05-21

Analyze the role played in the process of glass tempering furnace

People's demand for glass products and product quality put forward higher requirements. In the late 1960s, glass tempering furnace technology was rapidly and comprehensively promoted and popularized all over the world, and tempered glass began to be used in the fields of automobiles, construction, aviation and electronics. Today, the application of tempered glass has been extended to the furniture manufacturing industry, home appliance manufacturing industry, instrument industry, daily products industry and solar energy, wind power generation and other new energy industries, the future demand and demand of glass products will be greater. For more information, please log in Suizhong Yuantu Technology http://www.lnszytkj.com/ In the process of tempered glass processing, glass tempering furnace plays a decisive role. The main process is the selection of glass, cutting, edging, cleaning and drying, tempering, inspection and packaging, of which the tempering process of glass tempering furnace is the most energy-consuming link. In this link, the glass needs to be heated to 630 ° C, at this time the temperature in the furnace generally reaches 680 ~ 700 ° C, when the glass is heated to the required temperature, the glass is quickly and evenly cooled to room temperature, so that the glass surface produces compressive stress and the inner layer produces tensile stress, to achieve the effect of glass tempering.

Learn More
What is the glass processing process?

2019-05-21

What is the glass processing process?

Glass is tempered out of the tempering furnace, this everyone knows, so what is his process? The production process of glass includes: batching, melting, forming, annealing and other basic processes, as described in detail below :1. Ingredients, according to the designed material list, all kinds of raw materials are weighed and mixed evenly in a mixing machine. The main raw materials of glass are: quartz sand, limestone, feldspar, soda ash, boric acid, etc. 2. Melting, the prepared raw materials are heated at high temperature to form a uniform bubble-free glass liquid. This is a very complex physical and chemical reaction process. The melting of glass is carried out in the melting kiln. There are two main types of furnace

钢化炉

Learn More
< 12 >